This article explains how to adjust the image of an Elo monitor to be centered

Sometimes a display's image is shifted slightly off of the center axis when using VGA. The most common method to reset and re-center the image is to enter the OSD menu of your monitor by pressing the Menu button located on the monitor or monitor's OSD remote, open Video settings, and choose Auto Adjust. Instructions to navigate the OSD menu and choose Auto Adjust may also be found in the respective monitor's User Guide. 



Example menu showing location of Auto Adjust setting in OSD menu.

• NOTE: Auto Adjust is only available when connecting via VGA. In the example below Auto Adjust is grayed out due to the fact it is connected via HDMI.