This article explains how to manually register a device without accessing EloView

See below for how to manually register a device without accessing EloView 3.

There are two ways to register your devices with EloView – through the EloView web portal or directly from the device. To register a device directly from the device itself, use the EloView Control Panel to logon to the EloView web portal. Once connected, the Auto Provisioning process will start to configure the device settings and install all required applications.

Device Registration (Manually from Device)
1. On the device itself, access the Control Panel by pressing the physical and buttons at the same time.

2. When prompted, enter the default password “1elo” (no quotes)
Note: after registration, the default password is overwritten by the Control Panel password specified on the EloView web portal.



3. If necessary, go to the “Network” area to connect to a Wi-Fi network.



4. In the “Home” area, click the Register Device button



5. Enter your EloView username/password and click the Register button



6. Click the Done button.



7. The device will start applying device details from the EloView web portal.



8. When done, the default application will play on the device



Adding Device Name (and Additional Information)
9. Login to the EloView website – https://manage.eloview.com



10. In the “Devices” section, the new device is now listed. Click on the device name.



11. On the Details tab, click the Edit button to edit the device name (optional)



12. When done, click the Apply button.



13. Click on the Settings tab and verify that all default accounts settings have been applied to the new device.