This article provides the complete User Manual for the Elo Edge Connect™ Adaptive Controller (P/N: E564211). Below you will find comprehensive hardware specifications, step-by-step mounting installation guidelines, operating system compatibility thresholds, and keyboard key mapping procedures.
The compact 10-inch hardware display platforms (including the 10" I-Series 4.0 / 5.0 Standard & Value systems and the 1004L Touchmonitors) support the Elo Adaptive Controller mounting bracket in Landscape orientation only. Vertical Portrait mounting is not physically supported on 10-inch form-factors due to edge clearance boundaries.
Securing the Adaptive Controller directly to compatible displays requires specific accessory brackets. Ensure you verify the correct Elo Edge Connect bracket part number matching your hardware line (e.g., bracket P/N: E804265 or Wallaby Pro through-hole bracket P/N: E564414).
Table of Contents
- Chapter 1: Introduction & Specifications
- Chapter 2: Unpacking & Box Contents
- Chapter 3: Installation & System Drivers
- Chapter 4: Keyboard Programming & Custom Key Configuration
- Chapter 5: Technical Support & Troubleshooting common Problems
- Chapter 6: Safety, Regulatory & Environmental Guidelines
- Chapter 7: Warranty & Worldwide Support Directories
Chapter 1: Introduction & Specifications
Product Description
The Elo Edge Connect™ Adaptive Controller is a purpose-built, tactile accessibility keypad interface designed to dramatically improve commercial terminal interactions for individuals with visual impairments. It enables seamless navigation of screen-based menus through easily distinguishable physical tactile buttons. Additionally, integrated stereo audio guidance is available natively when standard headphones or assistive earphones are connected.
The device is fully compatible with Edge Connect mounting channels on Elo 10"/15"/22" I-Series computers and 10"/15"/22"/24"/27" touchmonitors, or can be integrated onto Wallaby Pro self-service stands using specialized through-hole brackets.
Technical Specifications
| Specification | Detail |
|---|---|
| Touchscreen Display Compatibility |
I-Series Form Factors: • 10" (I-Series 4.0 & 5.0 Standard / Value) — Landscape Only • 15" (I-Series 4.0 & 5.0 Standard / Value) • 22" (I-Series 4.0 & 5.0 Standard / Value) Standalone Touchmonitors: • 10" (1004L) — Landscape Only • 15" (1504L) • 22" (2202L) • 24" (2402L) • 27" (2702L) |
| Dimensions & Weight | Device: 3.90” x 3.90” x 1.24” / 99.00 mm x 99.00 mm x 31.57 mm Shipping Weight: 0.57 lbs / 0.26 kg |
| Port Interface Type | Micro USB |
| Power Source | USB Bus Powered (USB 2.0 Full-Speed Compliant, 5V DC Input) |
| OS Compatibility | • Windows® 10 / 11 • Android™ 12 and newer • Ubuntu® LTS 22.04 or above • Debian® 10 and newer |
Chapter 2: Unpacking & Box Contents
Verify that the shipping box contains all of the following standard components:
- 📦 1x Elo Adaptive Controller Tactile Keypad
- 🔌 1x Micro USB to Right-Angle Micro USB Cable
- 🔌 1x USB-A to Micro USB Data Cable
- 📖 1x Paper Quick Installation Guide (QIG)
Chapter 3: Installation & System Drivers
Attaching the Controller
Please refer directly to the physical paper Quick Install Guide (QIG) shipped inside the packaging container for complete visual diagrams, mounting hole alignments, and secure torque ratings.
Software Driver Requirements
The Elo Adaptive Controller behaves as a standard **USB-HID Keyboard** class device. Because this class relies on native, built-in operating system USB drivers, no custom software drivers are required. Simply mount, connect, and configure.
Chapter 4: Keyboard Programming & Configuration
Because the hardware configuration utility communicates directly with your keyboard controller over your browser using WebHID APIs, a secure connection context is required. If your workstation security policy blocks plain HTTP connections or throws an ERR_SSL_PROTOCOL_ERROR, follow these bypass steps:
- Open Google Chrome, type
chrome://flags/#unsafely-treat-insecure-origin-as-secureinto the address bar, and press Enter. - Enable the flag, add
http://fuda.com.hkto the text field list, and relaunch Chrome. - This treats the host as a secure context, successfully allowing the WebHID programming window to launch safely.
Configuring Custom Tactile Key Values
- Connect your Elo Adaptive Controller to your host computer using the provided USB cable.
- Launch Google Chrome and navigate to the official, non-secure utility portal: http://fuda.com.hk/elo.
- Click the green Connect button in the configuration tool to trigger Chrome's local HID device pop-up.
- Select "CM6542 Ada Controller" from the listed devices and click Connect.
- The on-page device status LED indicator will change to solid green, showing "Status: Device Connected".
- Map and modify individual physical key behaviors as required by selecting keys from the interactive drop-down menu lists.
- Once your map is complete, click Save Change to write the new custom key values directly to the controller's hardware flash.
Chapter 5: Technical Support & Troubleshooting
Solutions to Common Problems
| Symptom | Possible Causes | Recommended Solution |
|---|---|---|
| NO VOLUME OUTPUT | Damaged Micro-USB data cable | Replace the Micro-USB to Micro-USB right-angle data cable. |
| Faulted 3.5mm headphone jack board | Replace the internal audio headphone jack board assembly. | |
| TACTILE KEY(S) DO NOT FUNCTION | USB connection or port failure | Swap the Micro-USB cable and verify host USB port status in Device Manager. |
| Physical key matrix contact damage | Replace the keypad unit assembly. |
Chapter 6: Safety, Regulatory & Environmental
Electrical Safety Information
The voltage, frequency, and current requirements indicated on the manufacturer's product label must be met. Connecting this peripheral to non-compliant power lines can cause system hardware damage, poor touch sensitivity, or fire hazard. No operator-serviceable parts are located inside this device. Repairs must only be conducted by certified Elo Touch Solutions service technicians.
Emissions & Immunity Information
FCC Statement (United States): This hardware has been evaluated and complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are engineered to protect against harmful interference in standard residential, commercial, or public installations.
Industry Canada (IC) Statement: This equipment complies with Class B radio noise emission limits set out in the Canadian Industrial Radio Interference Regulations.
Compliance Declarations
- • FCC (US) Class B Compliance
- • CE (Europe) Mark Certification
- • UL & cUL (North America) Safety Listing
- • CB (International) Compliance Scheme
Environmental & Storage Conditions
In accordance with SJ/T11364, this product features an environmentally friendly lifecycle mark of 10 years under standard operating environments.
- Operating Temperature: 0°C to 40°C / 32°F to 104°F (Humidity: 20% to 80% RH, non-condensing)
- Storage Temperature: -20°C to 50°C / -4°F to 122°F (Humidity: 10% to 95% RH, non-condensing)
WEEE Recycling Directive
This hardware must not be disposed of with standard unsorted municipal waste. Please recycle this controller through your local authorized electronics disposal facility. To learn more about Elo's environmental programs, please review the Elo E-Waste Recycling Guidelines.
Chapter 7: Warranty & Global Contact Information
A standard 1-Year Hardware Warranty applies to this product. To review full warranty terms and conditions, visit: support.elotouch.com/warranty/.
| Region | Support Phone Lines | Email Support Desk |
|---|---|---|
| North America | +1 408 597 8000 (Fax: +1 408 597 8001) | andlosales.na@elotouch.com |
| Europe (EMEA) | +32 (0) 16 70 45 00 | Sales@EloTouch.com |
| Asia Pacific | +86 (21) 3329 1385 | eloAsia@elotouch.com |
| Latin America | +52 55 2281 6958 | EloSales.LatAm@elotouch.com |
Please report any broken links by emailing elo.support@zebra.com and include a link to the knowledge article