This article explains hot to set the DIP switches for Bluetooth interface on Epson TMT88 receipt printer

On the Epson TMT88 receipt printer, you can make various settings with DIP switches. The DIP switches are already set for the current interfaces. Change the settings if necessary. Functions of the DIP switches differ depending on the interface. 

1. Make sure the power supply for the printer is turned off.

2. Unscrew the screw to remove the DIP switch cover from the base of the printer. 


3. Set the DIP switches, using the tip of a tool, such as a small screwdriver. 



4. Replace the DIP switch cover and screw it in place.