This article provides step-by-step instructions on how to access the system Recovery and Bootloader menus on an Elo Backpack® 5 device.
Compatible Hardware
These instructions apply to the following hardware configuration:
- Device: Elo Backpack 5 Standard (Part Number:
E620713) - Operating System: Android 14 with GMS
- Platform: Qualcomm® QCS6490 Octa-Core Processor
⚠️ Critical Video Output Requirement:
For this procedure, you must connect your display using the USB-C port rather than the HDMI port. Standard HDMI video output is disabled during early boot phases, which will result in a blank screen and prevent you from viewing the Recovery or Bootloader menus.
Step-by-Step Instructions
- Power down: Turn off the Elo Backpack 5 and disconnect the power cable from the device.
- Initiate recovery mode: Press and hold the physical Home button, then reconnect the power cable to the device.
- Hold for indicator: Continue holding down the Home button for up to 25 seconds. Release the button only when the device status LED begins blinking white, indicating the system is entering the recovery partition.
- Release on menu load: When the system Recovery Menu loads on your display, release the Home button. The status LED will change to a solid white light.
Select Bootloader: Use short presses of the Home button to navigate down the menu list and highlight Reboot to Bootloader. Press the physical Power button once to select the highlighted option.
Reboot: The system will immediately reboot and initialize into the Bootloader Menu.
Video Demonstration
Watch the walkthrough below to see the timing of the button presses and LED indications:
Tip: Click anywhere on the video screen to pause. Use your keyboard's left and right arrow keys to rewind or fast-forward.
Please report any broken links by emailing elo.support@zebra.com and include a link to the knowledge article