This article provides the drawing for Elo Part Number: E323425, 15-Inch Front-Mount Bezel Kit.

See below drawing for E323425, 15-Inch Front Mount Bezel Kit (also .pdf attached to this article).

Here are the specifications and dimensions shown on the Elo Front Mount Option drawing (P/N E323425). All dimensions are in millimeters.

GENERAL
Part: Front Mount Option
Part Number: E323425
Finish: Black anodized
Assembly: Ordered separately, customer assembled
Compatible 15-Inch Open Frame monitors, ie: ET1537L
Customer panel maximum thickness: 14 mm
Corner radius: R7.3 mm (x4 outer corners)
Internal cutout corner radius: R15 mm max (x4)

FRONT VIEW (BEZEL OUTER SIZE)
Overall width: 373.4 mm
Overall height: 301.4 mm

SIDE VIEW (DEPTH)
Overall depth: 4.5 mm

CUSTOMER PANEL CUTOUT
Cutout width: 356.4 ±1.0 mm
Cutout height: 284.4 ±1.0 mm
Horizontal center to edge: 116.0 mm (each side from centerline)
Vertical center to edge: 116.0 mm (each side from centerline)

BRACKET SPACING
Horizontal bracket spacing: 313.4 mm (for brackets in horizontal position)
Vertical bracket spacing: 324.4 mm (for brackets in horizontal position)

OVERALL MOUNTING ENVELOPE
Width with brackets vertical: 396.4 mm
Height with brackets vertical: 385.4 mm

MOUNTING HOLES
Hole diameter: Ø5.0 mm (x4)

FASTENER NOTES
If panel material is wood:
– Ø4.5 mm through holes for M4 screws, or no through holes and use wood screws Ø4 mm

If panel material is sheet metal:
– Use concealed head threaded studs M4 with nuts

BRACKETS
Quantity: 2
Included with front mount assembly
Bracket orientation: Horizontal or vertical (dimensions provided for both)

This drawing defines the panel cutout, mounting hole pattern, overall bezel size, bracket envelope, and fastener requirements for installing an Elo 15-Inch Open Frame Monitor such as the ET1537L using the E323425 front mount bezel kit.