This technical article describes how to access the M.2 SATA SSD on the EloPOS AIO unit.
📝 Note: There is one SSD M.2 SATA slot on the EloPOS. Only one SSD can be installed. The maximum supported SSD size is 256GB.
Replacement SSD Part Numbers
- M.2 SATA 128GB SSD – Elo P/N: E206352
- M.2 SATA 256GB SSD – Elo P/N: E206556
Steps
To access the M.2 SATA SSD on the EloPOS unit follow the below steps:
1. Disconnect power from the EloPOS unit.
2. Remove Phillips screw (1) from lower access door (2), and carefully lift access door.
3. Remove Phillips screw from SSD and remove SSD (3)
Please report any broken links by emailing support@elotouch.com and include a link to the knowledge article