This article explains how to setup the Honeywell N3680 or 1st Generation 2D Barcode Scanner (E926356)

The Honeywell N3680 scan engine is used in the PayPoint Plus for Windows, including the below part numbers. 

E922014 - White, No OS, 5 Bill/6 Coin Cash Drawer
E833933 - White, Win 10, 5 Bill/6 Coin Cash Drawer
E921829 - White, No OS, 4 Bill/8 Coin Cash Drawer
E833323 - White, Win 10, 4 Bill/8 Coin Cash Drawer
E086179 - Black, No OS, 5 Bill/6 Coin Cash Drawer (MTO)
E548895 - Black, Win 10, 5 Bill/6 Coin Cash Drawer (MTO)
E549091 - Black, No OS, 4 Bill/8 Coin Cash Drawer (MTO)
E549280 - Black, Win 10, 4 Bill/8 Coin Cash Drawer (MTO)

Users typically need to setup the scanner's trigger in Presentation Mode, and setup the scanner's mode in Keyboard Mode. This can be done by using EZConfig, or by scanning the appropriate barcodes.

If the scanner is not lighting or appears unpowered, then set the scanner's trigger to Presentation Mode. The user will need to use the manual trigger, which is labeled as the Factory Reset Button in the below image, in order to trigger the scanner.



The below barcodes set the scanner to Presentation Mode. Try the first code, and if the scanner does not automatically light up when it senses motion, then scan the second code to set Presentation Mode. 

1)





2)




If the scanner is not outputting text or data, then set the scanner to Keyboard Mode. The below barcode sets Keyboard Mode. 


You may test the barcode scanner by opening a text field. For example, open the built-in Windows program called "Notepad", focus in the text box by clicking in the text box, and scan a barcode to test if the scanner outputs data. 

Users may need to consult with their application provider to determine if their application requires a different scanner configuration. 

See related article: 1st Generation 2D Barcode Scanner (E926356) Installation Guide