This article provides the steps to upgrade the firmware on the Elo 2D Barcode Scanner, P/N: E926356 which is a (Honeywell N3680)
Please see the below steps for upgrading the firmware on the Elo 2D Barcode Scanner, P/N: E926356
Required Materials:
• Elo 2D barcode scanner connected to applicable Elo computer or monitor.
• Honeywell™ EZ Config for Scanning v4.5.35 (or higher) Software application
• Firmware file for Windows OS only: CZ000170BBA.MOC
• Firmware file for Android OS only: CZ000142HAA.MOC
• Honeywell™ EZ Config for Scanning v4.5.35 (or higher) Software application
• Firmware file for Windows OS only: CZ000170BBA.MOC
• Firmware file for Android OS only: CZ000142HAA.MOC
NOTE: If updating a scanner that is being used on an Android device, you will need to use a USB A Male to Micro USB Female Adapter and connect to a Windows PC to do the update.
Procedure
1. Download & Install EZ Config for Scanning v4.5.35 (Internet Explorer recommended).
2. Plug in the scanner to computer or Monitor and open the EZ Config application
3. Select Connected device from main Window
4. Select Update Firmware
5. Browse for the firmware File location and select the file for your Operating System, (Android CZ000142HAA.MOC or Windows CZ000170BBA.MOC)
6. Please be patient, the update will take few minutes.
7. When update is finished a message will appear on screen stating, “Flash successful Reconnecting with Device”
2. Plug in the scanner to computer or Monitor and open the EZ Config application
3. Select Connected device from main Window
4. Select Update Firmware
5. Browse for the firmware File location and select the file for your Operating System, (Android CZ000142HAA.MOC or Windows CZ000170BBA.MOC)
6. Please be patient, the update will take few minutes.
7. When update is finished a message will appear on screen stating, “Flash successful Reconnecting with Device”
Please report any broken links by emailing support@elotouch.com and include a link to the knowledge article