This article provides the part number for a replacement power brick and cable for the Android I-series 2.0, 3.0, and 4.0 devices

E514304 is the part number for the 65W replacement power supply kit for the Android i-Series 2.0, 3.0, and 4.0 devices. These can be purchased from any of our resellers. Below are specifications.

Contents
The following is included in the kit:

• E512363 - IEC-C5 CAB-PWR-US-3 LOBE-1.8M-BLK-R
• E153026 = Power Brick, 19V/65W, Delta ADP-65JH, short plug

Specifications for Power Brick
Input

• Efficiency：84% Min. at nominal input voltage, maximum load and measured at the end of DC cable
• The wide AC input voltage range shall be 90 – 264 Vac, 47 – 63 Hz.
• The operating AC input voltage range shall be 100 – 240 Vac, 47 – 63 Hz.
• Input current, 1.5A max @ 100-240Vac and DC output full-load.
• Earth leakage current, 250uA max @ 264Vac, 47Hz

Output

• Output Power：65W
• Output Volts/Amps：19.0V/3.42A
• Leakage current:：Less than 75μA when adapter is connected to 240Vac/50Hz at normal condition
• Output ripple and noise：300 mV peak to peak
• AC Inlet Type: IEC 60320 AC Socket C6 type

Dimensions (mm)

• L108.0 x W46.0 x H29.5
• DC Cable Length: 1800mm +/-50mm, UL1185 #18 AWG
• DC Plug Specification: ¢2.5*5.5