This article provides instructions for updating the BIOS on an ECMG3 with H110 BIOS

This procedure is only for flashing the ROM on the ECMG3 w/ H110 BIOS. Do not attempt this on any other product as it could permantly damage the system.

1. Download 20181225v2.02TPMoff BIOS Update package HERE

2. Unzip the BIOS package to an MS-DOS bootable USB flash drive  

3. The content of the USB Flash should contain the below: 

 

4. Plug the USB flash drive into the ECMG3 with H110 BIOS 

5. Power on the system 

6. Enter BIOS Setting Chipset ME Control Disabled  

7. Save & exit, System will Re-boot to DOS mode 

8. Type “update” or  “AFUDOSP xxxxx.ROM /L”, press Enter. 



9. When BIOS update finish, restart the system