This article explains how to add a CFD (Customer Facing Display) to the back of an Elo I-Series 3.0 with Intel Device

The system this is being demonstrated on is the Elo E709537: ESY17i7-2UWA-1-SQ-MT-6G-2S-N0-00-BK

Steps for adding a CFD to an Elo I-Series 3.0 with Intel Device

1. Place I-Series device face down on a protective surface.



2. Remove the two Phillips screws



3. Slide the rear plastic cover off




4. Slide the included Rear CFD Cover onto the back of the unit and replace the two Phillips Screws




5. Remove the two Phillips screws from the front stand door



6. Run the CFD's USB-C cable through the cable routing hole and connect to USB-C port on the AIO





7. Use the included screws to attach the CFD to back of the unit through the pre-drilled mounting holes






The below can be found in the User's Manual of the product.