Where can I find information about Elo OEMConfig Feature Release V2.4?

The key update in this release is the support for Elo M51.

Important Note - Below are the minimum supported OS versions for devices compatible
with Elo OEMConfig 2.4:

• For Elo Pay 7" and Elo Pay M100: Use version 6.000.004.0205+7100p
• For I-Series 4 Standard, Backpack 4 Standard, M50, M50C, M60, and M60C: Upgrade to version 5.000.016.0048+p or 5.000.016.0048+ap.
• For I-Series 4 Value or Backpack 4 Value: Upgrade to version 5.000.016.0037+v or 5.000.016.0037+av.
• For M51: Upgrade to version 7.000.000.5072+gen5p.

Below are the supported features as part of this release for Elo M51

• Elo OTA
  • Auto and Manual OTA updates
• Date and Time
  • Time Zone: Set device time zone.
  • Display 24-hour Time: Enable/disable 24-hour time format.
  • NTP Server URL: Set NTP (Network Time Protocol) server URL for time synchronization.
  • NTP Sync Interval: Set sync intervals for NTP updates.
• Network
  • Disable Open Network Configuration: Manage open network settings.
  • WIFI DFS: Enable Dynamic Frequency Selection.
  • Ethernet: Configure Ethernet connection.
• Display
  • Display On: Turn the display on/off.
  • Display Brightness: Adjust the display brightness level.
  • Auto Idle Mode: Enable auto idle mode for display power-saving.
  • Screen Timeout: Set the screen timeout duration.
  • Screen Density (DPI): Configure screen density.
  • Smallest Display Width: Set the smallest display width for the interface.
  • Screen Orientation: Set the screen orientation (portrait/landscape).
• Navigation & Input
  • Navigation Bar: Configure the navigation bar visibility and buttons.
  • Virtual Keyboard: Enable/disable the virtual keyboard.
  • Copy/Paste: Control copy and paste functionality.
• Volume
  • Volume Level: Set the device volume.
• Hardware Management
  • Power Button: Configure power button behavior.
  • Home Button: Configure home button functionality.
  • Device Wakeup Key: Configure wakeup key behavior.
  • Left Trigger Key Remap: Remap left trigger key.
  • Right Trigger Key Remap: Remap right trigger key.
• Security
  • WebView Hardware Access: Control WebView’s ability to access hardware components.
  • Show Password: Display or mask password input.
  • Screen Lock: Enable or disable screen lock.
  • Old Password/PIN: Configure the current password/PIN.
  • New Password/PIN: Set new password or PIN.
  • Enterprise Reset: Perform a reset that removes enterprise configurations.
  • Elo Logging: Enable logging of device activities for diagnostic purposes.
• Application Management
  • App Permissions with Package Names: Manage app permissions based on package names.
• System Management
  • Sticky Boot Mode: Set persistent boot mode configuration across reboots and factory resets.

Known Issues & Notes

• Time Zone: In some cases, the time zone setting may change when network configuration is updated. This will be fixed in upcoming releases.
• Ethernet: Toggling between Ethernet and Wi‑Fi may intermittently fail to update as expected. This will be fixed in upcoming releases.

For additional details or support, please contact our team.