This article provides more information on the 63-Series connector panel and interfaces
Below information shows the connector panel and interfaces on the Elo 63-Series Open Frame monitors.
The below can also be found in the 63-Series User Manual.
Touch Display Connections
1. Connect a video cable from your host computer to the monitor. For VGA cables, tighten the video cables screws for best performance.
2. Connect the USB touch cable between the monitors USB connector and your PC’s USB port. (Not applicable for No Touch models)
3. Connect the power cable to the monitors input power jack and the AC power outlet.
4. The touch display ships in the ON state.
2. Connect the USB touch cable between the monitors USB connector and your PC’s USB port. (Not applicable for No Touch models)
3. Connect the power cable to the monitors input power jack and the AC power outlet.
4. The touch display ships in the ON state.
Please report any broken links by emailing support@elotouch.com and include a link to the knowledge article