This article explains why the wall mount kits designed for the Elo 5553L and 6553L Interactive Digital Signage (IDS) displays are not interchangeable.
⚠️ Important:
Elo recommends using only the wall mount kit specifically designed for your display model. Attempting to use an incorrect wall mount kit may result in improper fitment, installation issues, or potential safety concerns.
Elo recommends using only the wall mount kit specifically designed for your display model. Attempting to use an incorrect wall mount kit may result in improper fitment, installation issues, or potential safety concerns.
Supported Wall Mount Kits
Why the Kits Cannot Be Interchanged
Although the two wall mount kits may appear visually similar, the mounting structures and dimensions are different between the 5553L and 6553L displays.
The 6553L display uses a significantly larger chassis and different mounting geometry than the 5553L. As a result, the wall mounting brackets, mounting offsets, lower support spacing, and overall structural dimensions do not align correctly between the two models.
Key Differences
| Feature | 5553L Kit | 6553L Kit |
|---|---|---|
| Overall Display Width | 656 mm | 1490.6 mm |
| Overall Display Height | 643 mm | 865.6 mm |
| Lower Bracket Width | 400 mm | 557.8 mm |
| Wall Offset Dimensions | Different | Different |
| Power Recess Area | Smaller | Larger |
ℹ️ Note:
Even though some bracket measurements may appear similar, the mounting points and structural support locations are different between the two IDS models. The brackets will not properly align with the display chassis if the incorrect kit is used.
Even though some bracket measurements may appear similar, the mounting points and structural support locations are different between the two IDS models. The brackets will not properly align with the display chassis if the incorrect kit is used.
Recommendation
Always use the wall mount kit specifically designed for the display model being installed. Using the correct mounting kit helps ensure:
- Proper mounting alignment
- Correct weight support
- Safe installation
- Proper cable and power access clearance
- Compliance with Elo mounting specifications
⚠️ Warning:
Using an unsupported or incorrect wall mount kit may result in mounting failure, equipment damage, or injury. Elo strongly recommends using only approved mounting hardware designed for the specific display model.
Using an unsupported or incorrect wall mount kit may result in mounting failure, equipment damage, or injury. Elo strongly recommends using only approved mounting hardware designed for the specific display model.
Please report any broken links by emailing support@elotouch.com and include a link to the knowledge article