This article provides the step to install the Windows NT v3.1c driver
NOTE: Windows NT is no longer supported by Microsoft or Elo Touch Solutions.
Installing the Windows NT v3.1c Driver
- From an unzipped downloaded file
- Start NT Explorer
- Right-click the Start button
- Click Explore
- In the EloNT directory (or the one you specified at unzip time), double-click the setup.exe file
- Start NT Explorer
- From the TouchTools CD
- Insert the CD into the drive
- Allow several seconds for the CD to Auto-Run
- Click "Install MonitorMouse for Windows NT 4.0"
- Continuation of either case: Follow the instructions
- If more than one COM port is available, you may select Single or Multiple monitor installation
- The number of touchmonitors (up to 4) cannot exceed the number of COM ports available
- Click the Help button for details on multiple monitor installations
- If more than one COM port is available, you may select Single or Multiple monitor installation
- After reboot, the calibration comes up automatically.
- The calibration targets appear in the upper left, lower right and upper right corners of the display (as each one is touched, the next is displayed).
- For multiple monitors, you are asked to touch the monitor to be calibrated before the targets are displayed.
Please report any broken links by emailing support@elotouch.com and include a link to the knowledge article