This article explains how to get a right mouse click using the 9.0.1 driver

Starting with Elo Multi-Touch driver version 9.0 and above, to enable "right click" mode you must install the driver in "single-touch" mode using the EloOptions.ini file. 

Steps below are using V 9.0.1 driver

1. Download the latest Elo Multi-Touch 9.x driver to a location on your computer.

• Example: C:\Elo Driver 9.0.1

2. Run the WinZip Self-Extractor



3. Extract the file to the location you downloaded the driver but do not allow it to open when done unzipping.

• Deselct the box beside "When done unzipping open:..."

4. Choose OK after driver unzips and close the WinZip Self-Extractor.



5. Navigate to the unzipped file location (C:\Elo Driver 9.0.1) and open the unzipped folder.



6. Open the Common folder



7. Double-Click EloOptions.ini to open in Notepad



8. In the EloOptions.ini file, scroll down to [Setup Options] and change Touch_MouseMode = 0 to Touch_MouseMode = 1





9. From the File menu, choose Save then close EloOptions.ini


10. Navigate back to the download folder, double-click on Setup.exe



11. Read and Accept the End-User License Agreement to allow the driver to install.




12. Choose OK when driver installation completes



13. Go to the Desktop and double-click the EloConfig icon 



14. Open Touch Settings



15. Check the box beside Show right mouse button tool then click on Apply



16. A Right-click button will now be displayed at the top-left corner of touch monitor selected as shown below.