This article provides step-by-step instructions on how to cleanly install, verify, remove, and manually troubleshoot the legacy Elo Acoustic Pulse Recognition (APR) Touchscreen Driver.
🚨 Critical Compatibility & Driver Conflict Warnings:
- Driver Conflicts: The APR driver must not be installed on a computer that currently has the legacy Elo XP Universal "XPU" Driver active (which manages AccuTouch, IntelliTouch, CarrollTouch, or Surface Capacitive hardware). You must completely uninstall the XPU driver package before proceeding with this installation.
- Operating System Support: These legacy APR driver packages support only 32-bit (x86) versions of Windows Vista, WEPOS, Windows XP Professional, and Windows XP Home.
- Power Management: The legacy APR driver does not support system Standby (sleep) or Suspend power states.
⚠️ Calibration & Accuracy Standards:
While legacy APR driver versions 1.0 and 2.0 included a manual coordinate calibration utility, driver version 2.10 and all subsequent releases do not support manual calibration. APR technology relies entirely on a permanent, factory-coded acoustic profile mapped directly to the monitor's glass, which is inherently more accurate than user calibration. If manual calibration has degraded your touch accuracy, simply uninstall and reinstall the driver to restore the factory calibration settings.
Method 1: Clean Driver Installation
For optimal plug-and-play detection, please install the software package completely before physically connecting the monitor's USB touch cable to the computer.
Remove Existing Drivers: Navigate to the Windows Control Panel > Add/Remove Programs (or Programs and Features). Scroll to locate any active Elo touchscreen drivers on the list, select Change/Remove, and complete the uninstallation process.
- Disconnect Hardware: Ensure the monitor's USB touch controller cable is completely disconnected from the computer at this time.
Run Setup: Execute the downloaded APR driver installation package (or run the setup from the driver CD). Follow the on-screen installer prompts until you reach the Setup Complete screen.
- Connect touch USB: Connect the monitor's USB touch cable to an available USB port on your PC.
- Let Controller Flash: The operating system will automatically detect the hardware and initialize an onboard firmware flash transfer. This process will take several minutes to complete, after which touch functionality will become active.
Verify Device Manager Node: Once touch is functional, open Windows Device Manager, expand the Mice and other pointing devices category, and confirm that the Elo TouchSystems APR Controller is listed cleanly.
Method 2: Driver Removal Process
Uninstall from Control Panel: Navigate to Windows Control Panel > Add/Remove Programs, select Elo XP Universal Driver, and click Change/Remove.
- Dismiss Hardware Wizard: Close or cancel the Windows *Found New Hardware Wizard* if it automatically initializes during or immediately following uninstallation.
- File System & Registry Notice: Please note that following uninstaller completion, the root Elo installation folders and configuration files remain intact on your drive (only active system drivers, service filters, and the control panel applet are deleted). Additionally, secondary registry keys and the USB configurations in the primary registry are preserved for future hardware connection.
Method 3: Troubleshooting Driver Installation Failures
If you connect the monitor's USB touch cable before running the driver package, Windows may associate a generic driver with the device. This causes the controller to display in Device Manager under the Human Interface Devices (HID) group with a yellow exclamation warning icon, or triggers setup error codes:
To resolve this driver conflict and complete a clean installation, perform the following manual cleanup steps:
Uninstall Faulted Device: Open Windows Device Manager, locate the faulted node displaying the yellow warning symbol under *Human Interface Devices* (usually listed as
USB DeviceorElo TouchSystems APR Controller), right-click it, and select Uninstall.Immediately unplug the USB touchscreen controller cable from your computer.
Delete Cached INF Files: Windows caches driver files under its system directory. We must delete any stale Elo INF files.
- Navigate to the local system folder:
C:\Windows\inf(orC:\WINNT\infon legacy systems). - Locate and open any files named
OEMx.inf(wherexrepresents any number, such asOEM2.inf,OEM15.inf, etc.) using Notepad. - If the file header contains references to "Elo Touch Solutions" or "Elo TouchSystems", delete that specific
OEMx.inffile.
- Crucial: You must also delete the matching compiled PNF file paired with the INF file you removed (e.g., if you deleted OEM2.inf, you must also delete OEM2.PNF from the same folder).
- Navigate to the local system folder:
Open Registry Editor: Press the Windows Key + R, type
regeditin the Run dialog, and select OK.Delete Registry Keys: Navigate to the following path:
\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ServicesLocate and delete the following two folder keys:
ElomoufiltrEloUsb
Note: If you receive a permission error, right-click the folder key, select Permissions, check the box for Full Control / Full Permission, and then delete.
- Reboot: Restart the PC.
- Reinstall Software: Run the clean APR driver package setup without connecting the USB cable.
- Reconnect touch USB: Once setup finishes, plug the USB cable from the monitor back into your computer.
Complete Installation: Allow the automated flash file transfer to complete. Your touchscreen will now initialize and become functional. Correct setup will display the controller node cleanly in Device Manager:
Please report any broken links by emailing elo.support@zebra.com and include a link to the knowledge article