This article provides the steps to set up an Elo 0702L display with a Windows 10 system.

Setting Up the Elo 0702L on Windows 10

Procedure

1. Connect the 0702L’s USB and video cables to the Elo I-Series.

2. Windows 10 typically installs the DisplayLink drivers automatically.

   • If the drivers do not install, download and install the correct version from DisplayLink:
     Windows Driver Downloads (DisplayLink)

3. Once connected, the display should default to Extended Mode.

   • If not, open Display Settings in Windows and select Extend these displays.

4. Open Control Panel > Hardware and Sound > Tablet PC Settings > Calibrate the screen for pen or touch input.

5. In Tablet PC Settings, click Setup.

6. When prompted on the I-Series screen with “Touch this screen to identify it as the touchscreen,” touch the I-Series display.

7. When the message “Press Enter to proceed to the next step” appears, press Enter on the keyboard.

8. When prompted on the 0702L screen, “Touch this screen to identify it as the touchscreen,” touch the 0702L display.

9. Close Tablet PC Settings. Touch input should now function correctly on both displays.