Elo / Zebra Technical Support
How Do I Resolve Missing Device Manager Drivers (Such as RS-232 COM Ports) After Reimaging an Elo All-in-One (AIO) System?
Issue Overview
After reimaging an Elo Windows All-in-One (AIO) touchcomputer (such as an EloPOS, I-Series with Intel®, or E-Series system) with a fresh Windows OS image or custom enterprise image, you may notice devices flagged with yellow exclamation marks (!) or listed under Other devices in Windows Device Manager.
Frequently, even after installing the primary System Driver Pack, certain controllers—most notably the RS-232 Serial / COM Port drivers (often appearing as USB-Serial Controller, PCI Serial Port, or Unknown Device)—remain missing and must be installed separately.
⚠️ Important Note: System vs. Peripheral Driver Packs
Elo separates Windows AIO drivers into two distinct packages: the System Driver Pack (chipset, graphics, audio, LAN, Wi-Fi) and the Peripherals Driver Pack. Because RS-232 COM ports, expansion hub ports, barcode scanners, MSRs, and fingerprint readers interface as peripheral controllers, the RS-232 COM port drivers are typically bundled inside the "Peripherals" driver pack rather than the main system pack.
Applicable Systems
- EloPOS™ Systems & EloPOS Pack
- I-Series 2.0 & 3.0 with Intel® (Windows)
- E-Series AIO Touchcomputers
- IDS Computer Modules (ECM) & Backpack® with Intel®
- Legacy AIO Series (B-Series, C-Series, D-Series, X-Series, PayPoint® Plus for Windows)
Resolution Steps
Step 1: Download the Correct Driver Packs
- Navigate to the official Elo Computer Driver Packs page on the Elo Support Portal.
- Select your specific AIO product line (for example, EloPOS & EloPOS Pack or I-Series with Intel®) and match your exact screen size, processor generation (e.g., Celeron, i3, i5, i7), and Windows OS version.
- Locate the available downloads for your model. You will see two separate archives:
- System Driver Pack (contains core motherboard and display drivers)
- Peripheral Driver Pack (labeled as Peripherals — contains RS-232 COM port, expansion hub, and accessory drivers)
- Download the Peripherals driver pack (and the System driver pack if you have not yet installed core motherboard drivers).
🛑 Critical Warning: Extract All Files Before Installing
Do not attempt to run driver installers directly from inside the compressed .zip folder, and do not rely on Windows Update to automatically locate proprietary Elo RS-232 or hub controller drivers. Running installers inside an unextracted archive will cause missing dependency errors or silent installation failures.
Step 2: Extract the Peripherals Driver Pack
- Create an easily accessible folder on the local drive (for example,
C:\EloDrivers\Peripherals). - Right-click the downloaded Peripherals
.zipfile, select Extract All..., and extract the contents into your newly created folder. - Open the extracted folder and check if any sub-packages (such as the RS232, COM Port, Serial, or Prolific/FTDI folder) are also compressed as nested
.zipfiles. If so, extract those subfolders as well.
Step 3: Install the RS-232 COM Port and Missing Drivers
You can install the drivers using either the automated installer inside the subfolder or manually via Windows Device Manager:
Method A: Using the Driver Package Installer (Recommended)
- Open the extracted Peripherals folder and navigate to the RS232, Serial, or COM Port directory.
- Right-click the executable installer (typically named
Setup.exeorinstall.bat) and select Run as administrator. - Follow the on-screen prompts to complete the installation and reboot the system if prompted.
Method B: Manual Installation via Windows Device Manager
- Right-click the Windows Start button and select Device Manager.
- Locate the flagged device under Other devices or Ports (COM & LPT) (marked with a yellow warning icon).
- Right-click the missing device and select Update driver.
- Click Browse my computer for drivers.
- Click Browse... and select the root of your extracted
C:\EloDrivers\Peripheralsfolder. - Ensure the checkbox for Include subfolders is checked, then click Next. Windows will automatically scan all subfolders for the matching
.inffile and install the driver.
Verifying the Installation
Once the installation completes, verify that your serial ports and peripherals are properly recognized:
- Open Device Manager and confirm there are no remaining yellow exclamation marks under Other devices.
- Expand the Ports (COM & LPT) section and verify that your COM ports (e.g., COM1, COM2, USB Serial Port) are listed cleanly and ready for use.
Please report any broken links by emailing elo.support@zebra.com and include a link to the knowledge article